Distribution

The 1U high pull-out fiber optic switch with mounting accessories is a product designed for installation inside 19" wide data communication cabinets. It was made entirely of durable powder-coated steel sheet.The front panel is equipped with port numbering and screw holes for better attachment of a..

Fiber optic box equipped with 1 entry for the main cable and 2 exit holes. The entrances are secured with rubber plugs through which cables can be led. Inside there is a hinged tray with a separate place for welds. A lot of space has been reserved in the sleeve for a spare cable.Warning! The offer..

Equipped with 1 input for the main cable and 4 output holes. All entrances are secured with rubber plugs. The muff is distinguished by its small size while maintaining a functional structure. Inside there is a hinged tray, in its upper part there is a place for welds. There is space under the tray t..

Fiber optic box equipped with 2 inputs and 16 outputs for fiber optic cables. It uses a stock type cable gland, which makes it possible to route the fiber without cutting it first. Inside there is a hinged tray with a frame for adapters. If you want to weld the splitter directly to the cables, you c..

Fiber optic box equipped with 2 entries for main cables and 24 exit holes. The bus entrances have a stock-type cable gland, which allows the cable to be led through without cutting it. The exit holes are closed with a resistance using the included rubber plugs.The offered product has a hinged tray..

Opton fiber optic distribution box adapted to be mounted in a 19 "rack. The height is 1U, the product is made of 1 mm thick steel sheet covered with Magnelis coating, the back has two empty holes and two secured by glands. Inside there are numerous ribs that allow you to fasten the cables with clamp..

Designed for mounting on RACK 19 "1U brackets Made of 1mm thick steel sheet It has 24 holes for SC Simplex adapters or 24 LC Duplex adapters Equipped with a pull-out and removable drawer for convenient access to the interior The drawer has ribs for mounting cable ties Splice trays included..

Homemade termination box with a specific structure. In the upper and lower part it has one hole for the cable, in the side part two holes (all can be punched out). Inside there is space for mounting one adapter and plenty of space for spare cable. At the back of the box (see photos) there are holes ..

Home/subscriber fiber optic termination box. It has space for one SC Simplex or LC Duplex adapter. The cable can be inserted through one of the holes in the walls -  in order to insert the cable, break the plastic element that goes into the entrance hole . The box is designed for wall mounting, no d..

Custom made fiber optic termination box. It has a place to hide a spare cable and two holes adapted for mounting adapters. Used as the end of the FTTH fiber that is led to the customer. On the front there is a retractable panel under which you can hide the adapters and the end of the fiber optic cab..

The box is suitable for indoor installation, has 4 holes through which the cable can be led. The product is ideally suited for use with an optical splitter. Inside there is a hinged tray on which we can put a spare cable. The frame will fit 4 SC simplex adapters or 8 LC simplex adapters.Standard a..

Home termination box equipped with an adapter and SC / APC pigtail (G.652.D fiber). The product is mounted on the wall, inside there is a tray with a place for welds and a spare cable.Dimensions: Length: 10.5 cm Width: 8.2 cm Depth: 2.1 cm..